EN
G
LIS
H
EN
G
LIS
H
13
INSTALLATION
3
Assemble the charging station onto the top of
the floor stand pipe.
4
Connect the power adapter to the port on the
back of the charging station.
5
Drill a hole in the wall and insert the drywall
anchor
b
if needed.
•
Before drilling, make sure that there are no
pipes or electrical wires inside the wall at
the desired location.
•
For drywall anchor: use 1/4
″
(6.5 mm) drill
bit
•
For concrete or wall stud: use 1/8
″
(3 mm)
drill bit
•
If screwing into drywall, use the drywall
anchor.
6
Align the wall anchoring block
c
of the
chanrging station, and fix the charging station
to the wall by tightening the anchoring screw
d
all the way.
7
Plug the power cord into the power outlet.
Using Double-Sided Tape to Secure the
Appliance
1
Use the double-sided tape
a
to attach the
wall anchoring block
b
to the charging
station.
•
Remove the center section of double-sided
tape before attaching it to the wall
anchoring block.
2
Attach the second piece of double-sided tape
to the other side of the wall anchoring block
to secure it to the wall.
•
Do not use double-sided tape on wallpaper.
us_main.book.book Page 13 Tuesday, March 31, 2020 5:28 PM
