LG CodePlus HCS6300 Series Скачать руководство пользователя | Manualshive

Страница: 51 / 52

background image

206-4122

51

Open Source Software Notice

The following GPL executables used in this product are subject to the GPL Version 2.0 License Agreements.

GPL EXECUTABLES:

Linux kernel 2.6.26, boa 0.94, busybox 1.10.1, dhcpcd 0.70, eraseall 1.7, inetd 1.0,

lrzsz 0.12.20, simpleinit 1.21
LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of per-

forming such distribution, such as the cost of media, shipping and handling upon e-mail request to LG

Electronics at: [email protected]. This offer is valid for a period of three (3) years from the date of the

distribution of this product by LG Electronics.
You can obtain a copy of the GPL license from: http://www.gnu.org/licenses/old-licenses/gpl-2.0.html.
This product includes:

•

echo:

Copyright © 1998 David I. Bell
Permission is granted to use, distribute, or modify this source, provided that this copyright notice

remains intact.

•

telnet v1.9:

Copyright © 1989 The Regents of the University of California
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the

following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and

the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following

acknowledgement: This product includes software developed by the University of California, Berkeley

and its contributors.
4. Neither the name of the University nor the names of its contributors may be used to endorse or

promote products derived from this software without specific prior written permission.

All rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this open source software

and associated documentation files (the “Software”), to deal in the Software without restriction, including

without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies

of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following

conditions:
SUBJECT TO THE TERMS OF THE GPL VERSION 2.0 LICENSE AGREEMENTS, THE SOFTWARE IS

PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT

NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PUR-

POSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS, COPYRIGHT HOLDERS, OR

LG ELECTRONICS (THE “LICENSOR”) BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABIL-

ITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR

IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE,

EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. LICENSEE

ASSUMES THE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.

«
...
49
50
51
52
»

Содержание CodePlus HCS6300 Series





















































Отзывы:

Нет отзывов

Похожие инструкции для CodePlus HCS6300 Series

Бренд: Nautel Страницы: 23

Бренд: Nautel Страницы: 66

Бренд: ABBA Страницы: 8

Бренд: MAMAC SYSTEMS Страницы: 4

Бренд: Maico Страницы: 24

Бренд: Fiio Страницы: 8

AN/PRC-117D Series

Бренд: Harris Страницы: 40

Бренд: Tigo Страницы: 3

Бренд: Motorola solutions Страницы: 100

Бренд: Intek Страницы: 36

Бренд: autosen Страницы: 24

Lightolier Controls CLMIR

Бренд: Philips Страницы: 2

Dynalite DIR-TX8

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Avalon CTS M2720A

Бренд: Philips Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды