manualshive.com logo in svg

LG Code Zero A9 Series, Руководство пользователя

Поделиться
Скачать
LG Code Zero A9 Series Скачать руководство пользователя страница 18

-18-

How to use

2

Insert the battery into the auxiliary charging station.

Charging indicator 

of the auxiliary 

battery

Please note

• 

Make sure that the power adapter is connected to both 
the charging station and the power outlet

• 

If the main battery is charging on the charging station, 
the auxiliary battery will only start charging once the main 
battery is fully charged.

• 

The auxiliary battery indicator flashes when charging 
starts.

• 

The indicator will stay on when the auxiliary battery is 
fully charged.

• 

Fully charging a single battery usually takes 3.5 hours, 
but it will take twice as long if you charge it along with a 
discharged auxiliary battery.

Power / Suction Strength button

You can adjust the suction strength with the suction 
strength button located on the handle.

1

2

1

 Power On/Off button

• 

Press the power On/Off button to activate the 
Normal mode.

2

 Mode button

• 

Press "+" once to activate the Power mode.

• 

Press and hold "+" for more than 3 seconds to 
activate the Turbo mode.

• 

The unit will take a moment to switch to the Turbo 
mode from the Normal mode when the "+" button is 
held down.

• 

Press "-" to switch  from Turbo to Power, or from 
Power to Normal.

Charging the Product

1

Put the product on the charging station.

• 

The battery indicator will start to flash and charging 
will proceed in 3 steps.

2

The battery indicator starts to flash and charging will 
start.

• 

All of the indicators will stay on when the battery is 
fully charged.

 CAUTION

• 

Make sure to securely fit the unit on to the charging station. 
Otherwise, the product may fall and get damaged.

Please note

• 

The battery will not be charged if the ambient 
temperature is below 5°C. only charge the battery when 
ambient temperatures are between 5° and 38° C.

• 

The battery indicator will flash if the product is fully 
charged, removed from the station, and charged again 
soon. The flashing stops soon, and the indicator stays on.

Charging the auxiliary battery

1

Hold the product and pull the battery by pressing both 
ends of the battery.

Содержание Code Zero A9 Series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды