Operating
21
Oper
ating
3
Setting the alarm
You can use the unit as an alarm clock.
You have to set the clock before setting the alarm.
1. Turn the unit on.
2. Press
ALARM
. Each of functions flashes.
3. Press
SET/RDS
when the function you want to
be woken by is showing.
4. “ON TIME” will be displayed. This is your desired
time to the unit turns on. Press
C
/
V
on
the remote control or
Y/U
on the unit to
change the hours and minutes and press
SET/RDS
to save.
5. Press
C
/
V
on the remote control or
Y/U
on the unit to change the volume
and press
SET/RDS
to save.
6. If you want to reset the alarm, press and hold
ALARM
. Then repeat steps 3-5.
y
Alarm function only works when the unit is
turned off after setting the alarm.
y
If you set the clock time and alarm, you can
check the time by pressing
CLOCK
or the
alarm by pressing
ALARM
even when the
unit is turned off.
y
If the alarm is already set, press
ALARM
once to cancel the alarm. To activate the
alarm, press
ALARM
once again.
y
If the clock time or the alarm is already set,
press and hold
CLOCK
or
ALARM
for at
least 2 seconds to reset the clock or the
alarm.
,
Note
Sleep Timer Setting
Press
SLEEP
repeatedly to select delay time
sequence from 180 to 10 minutes. After the delay
time, the unit will be turned off.
To cancel the sleep function, press
SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP
once again while “SLEEP 10” is displayed.
y
You can check the remaining time before
the unit is turned off.
y
Press
SLEEP
. The remaining time appears in
the display window.
,
Note
Dimmer
Press
SLEEP
once. The display window will
be darkened by half. To cancel it, press
SLEEP
repeatedly until the display window get bright.
CM2440-BB_AGBRLLK_ENG_7046.indd 21
2014-07-23 9:43:58
