Terminal Development Center
8
LGIC
6. Convenient Functions
*
Area code input/setup, automatic reception, calculator, voice recognition setup, automatic
answer functions can be set.
6.1 Automatic Area Code
*
The stored area code is added to the dial number automatically while a call is originated.
l
Select
Menu + 6 + 1
.
l
Select one of ‘ Setup/Release’ using the next setup key (
Soft Key1)
or ‘
V
/#’ key and press
STORE
key.
l
If you select ‘ Release’ , it will be in the stand-by state. In case there is a pre-stored number, that
number will be deleted.
l
Press
SETUP
to enter the area code. [Max. up to 4 digits ]
l
Press
OK
key to store the entered contents.
If the entered area code is not registered one, a message of ‘ Wrong Number’ appears with a
beep alarm and it returns to its initial stage.
6.2 Automatic Reception
*
If the user does not answer an incoming call, after the telephone rings as many times as the set
number of the bell for the automatic reception, call is established automatically.
l
Select
Menu + 6 + 2
l
Select one of ‘ Release / After 1st Ring / After 3rd Ring’ using the next setup key (
Soft Key1)
or
‘
V
/#’ key and press
STORE
key.
¢ Ñ
In case of melody, the incoming call is received after the 1
st
tune
regardless of the setting
value.
6.3 Calculator
*
[Add / Subtract / Multiply / Divide] can be executed.
*
You can enter the decimal point with [
V
] key.
l
Select
Menu + 6 + 3
.
l
Enter numbers. [9 digits can be entered including the decimal point]
l
Select operators using Soft Key1 key.
l
Enter numbers. [9 digits can be entered including the decimal point]
l
Select [ = ] operator using Soft key1 key and press [OK] key. [9 digits including the decimal point
can be displayed]
