Terminal Development Center
7
LGIC
l
Select
Menu + 6 + Password 4-digit + 5
.
If the telephone number stored in the telephone number 1is appeared empty, a message of
‘ None’ appears.
l
Select the memory address where you want to make input using the next setup key (
Soft Key1)
or
‘
V
/#’ key [ 1 ~ 3 ]
l
Select the edit mode by pressing
EDIT
key.
l
Enter the telephone to store and press
OK
key.
If you want to terminate the process at this time, press the
END
key and if you want to enter the
telephone in other memory address, repeat the procedures that follow the step of memory address
selection.
5.6. Password Change
*
Function to change the password
l
Select
Menu + 6 + Password 4-digit + 6
.
l
Enter a new password of 4-digit and press
STORE
key.
l
For the reconfirmation, enter the password you entered just before in 4-digit.
l
Press
OK
key. [It is then back to the previous status]
5.7. International Call Restrict
*
Function to restrict the originating for the international call
l
Select
Menu + 6 + Password 4-digit + 7
l
Select ‘ Setup’ of ‘ Setup/Release’ using the next setup key (
Soft Key1)
or ‘
V
/#’ key and press
STORE
key.
¢ Ñ
Once the international call is restricted, the international call cannot be originated.
5.8. Automatic PIN Transmit
*
Function to set up PIN CODE and store it.
l
Select ‘ Setup’ of ‘ Setup/Release’ using the next setup key (
Soft Key1)
or ‘
V
/#’ key and press
STORE
key.
¢ Ñ
This function is not used currently. (It is subject to change later by the service provider)
5.9. Software Version Confirm
*
Function to confirm the software version of the phone.
l
Select
Menu + 6 + Password 4-digit + 9.
¢ Ñ
MSM Version / Self Source Version / Qualcomm Source Version are appeared.
