Make sure that you have
correctly installed your
VCR as described earlier
in this book.
Press
POWER
to turn on
your VCR.
Turn on your TV.
Insert a pre-recorded
video tape into your VCR
and press
PLAY
on the
remote control.
Select a TV channel
number on which you
wish to watch video’s.
Don’t worry if you don’t have
a video-tape to play at this
stage!
If you switch your VCR on
and continue stages
3~4
,
instead of seeing video
playback tune your TV until
you see a bright blue
screen.
Tune this channel until
the video picture is sharp
and the sound is clear.
If you have used a
SCART
or
AUDIO
and
VIDEO
cables
you will not have to tune your
TV, simply select the
AV
channel. The
AV
channel is
already pre-tuned for opti-
mum video playback on your
TV
.
Store this channel on
your TV.
You will need to look at the
TV instruction book if you do
not know how to do this.
8
T
uning
in a
V
ideo channel
On your
TV
Your TV receives signals from the video recorder (VCR) like another TV station.
You have to select a channel number on your TV and tune it in so that you may watch video
tapes.
If you have used a
SCART
or
AUDIO
and
VIDEO
cables then your TV should already have
a dedicated video channel built into it, usually called
AV
.
The output frequency of
this video recorder (VCR)
is set at UHF channel 22.
If channel 22 is already
used by another TV
station, or if the picture is
distorted, you can
change the transmitter
channel of your VCR.
Stages 5~8 will show you
how to change the output
frequency of your VCR.
REC/
P/STILL
STOP
PLAY
REW
FF
D
OK
i