LG BC250Y, Руководство пользователя

Страница: 7 / 32

7
T
uning
in a
V
ideo channel
On your TV
Your TV receives signals from the video recorder (VCR) like another TV station.
You have to select a channel number on your TV and tune it in so that you may watch video
tapes.
If you connect a monitor or a TV set equipped with SCART socket this adjustment will not
be necessary, simply select the AV mode on your TV.
The output frequency of
this video recorder (VCR)
is set at UHF channel 60.
If channel 60 is already
used by another TV
station, or if the picture is
distorted, you can
change the transmitter
channel of your VCR.
Stages 5~8 will show you
how to change the output
frequency of your VCR.
Make sure that you have
correctly installed your
VCR as described earlier
in this book.
Press POWER to turn on
your VCR.
Turn on your TV.
Insert a pre-recorded
video tape into your VCR
and press
PLAY on the
remote control.
Select a TV channel
number on which you
wish to watch video’s.
Don’t worry if you don’t
have a video-tape to play
at this stage!
If you switch your VCR
on and continue stages
3 ~ 4 , instead of seeing
video playback tune your
TV until you see a bright
blue screen.
Tune this channel until
the video picture is sharp
and the sound is clear.
If you have used a
SCART cable you will
not have to tune your TV,
simply select the
AV
channel. The AV channel
is already pre-tuned for
optimum video playback
on your TV.
Store this channel on
your TV.
You will need to look at
the TV instruction book if
you do not know how to
do this.
POWER
EJECT
CLK/CNT
REC/
P/STILL
STOP
PLAY
REW FF