13
SMARTDIAGNOSIS
™
function is available only for
the products with a
SMARTDIAGNOSIS
™
mark.
(Refer to Page 30.)
⑦
②
③
④
⑥
⑪
⑤
⑨
⑧
⑫
⑩
⑦
Program
•
Press the cycle that corresponds to your desired wash cycle.
⑧
Extra Hot
•
If you select the
Extra Hot
function, the operating temperature will be up to 80ºC.
(Dual Intensity, Auto, Eco, Eco Plus)
•
To engage the
Extra Hot
rinse in the allowable cycles, hold down the
Dual Intensity
&
Auto
buttons
simultaneously.
⑨
Beep On/Off
• The dishwasher must be switched on.
• The beep on/off function can be engaged or disengaged by pressing the
Delay Start
and
Quick & Dry
buttons
simultaneously for a few seconds.
⑩
Eco Plus
• If you want to use
Eco Plus
course, press & hold
Eco
button for 3 seconds.
⑪
Child Lock
• Used to lock or unlock the control buttons to prevent all the setting from being changed by a child.
• To activate or release the
Child Lock
function, press the
Quick & Dry
and
Quick
buttons simultaneously for a
few seconds while the dishwasher is in operation.
•
All controls will be disabled except the
Child Lock
and
Power
buttons.
•
Turning off the dishwasher will not reset the
Child Lock
function. You must release the
Child Lock
before you
can operate the dishwasher.
⑫
Power
•
For operating, press this button first for power on.
• After the programme has completed, this button automatically switches off for safety and energy saving.
• The unit will automatically turn off if the programme is interrupted and not resumed, or started within 4 minutes.
•
In case of mild power surges to the machine, the power may be automatically turned off for safety.
•
To turn the power off during a programme, press the
Power
button twice.
The Dishwasher can be used without salt if not required,
however, the hardness level will need to be set to H0 so
that the indicator does not remain lit. (See page 14.)
