LG AS-C30_Series, Руководство пользователя

Страница: 8 / 24

ON OFF
CANCEL
SET
Flip-up door
(opened)
Signal transmitter
1
5
6
4
2
7
11
8
13
15
3
10
9
12
17
14
16
AUTO CLEAN
Cooling Operation
Auto Operation or Auto Changeover
Healthy Dehumidification Operation
Heating Operation
• Cooling Model( ), Heat Pump Model( )
Operating Instructions
8 Room Air Conditioner
The remote control transmits the signals to the system.
Remote Control Operation
Operation Mode
1. START/STOP BUTTON
Operation starts when this button is
pressed and stops when the button is
pressed again.
2. OPERATION MODE SELECTION
BUTTON
Used to select the operation mode.
3. ROOM TEMPERATURE SETTING
BUTTONS
Used to select the room temperature.
4. INDOOR FAN SPEED SELECTOR
Used to select fan speed in four steps
low, medium, high and CHAOS.
5. JET COOL
Used to start or stop the speed
cooling. (Speed cooling operates
super high fan speed in cooling mode.)
6. CHAOS SWING BUTTON
Used to stop or start louver movement and
set the desired up/down airflow direction.
7. ON/OFF TIMER BUTTONS
Used to set the time of starting and
stopping operation. (See page 17)
8. TIME SETTING BUTTONS
Used to adjust the time. (See page 17)
9. TIMER SET/CANCEL BUTTON
Used to set the timer when the desired time
is obtained and to cancel the Timer
operation. (See page 17)
10. SLEEP MODE AUTO BUTTON
Used to set Sleep Mode Auto operation.
(See page 17)
11. AIR CIRCULATION BUTTON
Used to circulate the room air without
cooling or heating. (See page 18)
12. ROOM TEMPERATURE CHECKING
BUTTON
Used to check the room temperature.
13. PLASMA(OPTIONAL)
Used to start or stop the plasma-
purification function. (See page 15)
14. HORIZONTAL AIRFLOW DIRECTION
CONTROL BUTTON
(NOT ON ALL MODELS)
Used to set the desired horizontal airflow
direction. (See page 18)
15. RESET BUTTON
Used prior to resetting time or after
replacing batteries.
16. 2nd F Button
Used prior to using modes printed in blue
at the bottom of buttons. (See page 16)
17. AUTO CLEAN(OPTIONAL)
Used to set Auto Clean mode.