Operating Instructions
Owner’s Manual 7
ENGLISH
Remote Controller
Signal
receptor
Operation indication lamps
Operating Instructions
1. Remove the battery cover by pulling it according to the
arrow direction.
2. Insert new batteries making sure that the (+) and (-) of
battery are installed correctly.
3. Reattach the cover by sliding it back into position.
Use 2 AAA(1.5volt) batteries.
Do not use rechargeable batteries.
NOTICE
• The remote control may be stored mounted on a wall.
• To operate the room air conditioner, aim the remote
control at the signal receptor.
Storage and Tips For Using the Remote Control
Signal Receptor
Receives the signals from the remote control.(Signal receiving sound: two short beeps or one long beep.)
Operation Indication Lamps
On/Off
: Lights up during the system operation.
Timer or Sleep Mode : Lights up during Timer operation or Sleep mode.
Defrost Mode
: Lights up during Defrost Mode or Hot
Start operation (Heat pump model only)
: Lights up during outdoor unit operation.
(Cooling model only)
Plasma Mode
: Lights up during plasma-purification operation.
(option)
Auto Restart Mode
: Lights up during if Restart Button is pressed.
Auto Restart Button
: In failure of electric power, if the button is
pressed the unit runs as previous setting
operation when power returns.
Forced Operation Button : Operation starts, when this button is pressed
and stops when you press the button again.
Outdoor unit
operation
Содержание AS-C30_Series
Страница 24: ...Memo 24 Room Air Conditioner ...