23
Installation
Ins
talla
tion
3
[Audio] Menu
Speaker Setup
Make the following settings for the built-in 7.2
channel surround speaker.
1.
Select [Speaker Setup] on the [Audio]
menu.
2.
Press
ENTER
( )
The [SPEAKER] menu appears.
3.
Use
A
/
D
to select the desired speaker.
4.
Adjust options using
W
/
S
/
A
/
D
buttons.
5.
After adjusting the desired options, press
RETURN
(
x
). The menu moves to the
previous screen.
[Speaker]
Select a speaker that you want to adjust.
Certain speaker settings are prohibited by the
Dolby Digital licensing agreement.
,
Note
[Size]
Since the speaker settings are fixed, you
cannot change the settings.
[Volume]
Press
A
/
D
to adjust the output level of the
selected speaker.
- Front L/R : 0 to -5
- SubWoofer 1/2, Rear L/R(1/2),
Center : 5 to -5
There is the other way to adjust the speaker
levels. Refer to page 26.
,
Note
[Distance]
After you connected speakers to your unit,
set the Distance between the speakers and
your listening point if the distance of Center
or Rear speakers is bigger than the distance
of Front speakers. This allows the sound
from each speaker to reach the listener
at the same time. Press
A
/
D
to adjust
the distance of the selected speaker. This
distance is equivalent to a difference of the
distance between Center or Rear speaker
and Front speakers.
[Speaker Test Start] / [Speaker Test Stop]
Select [Speaker Test Start] by using
the
W
/
S
and press
ENTER
( ).
Press
ENTER
( ) again to stop. Adjust the
volume to match the volume of test signals
memorized in the system.
AR936TS-AH_DNGAFLX_ENG.indd 23
2013-09-09 11:20:22
