LG ARNU15GSJA4 Скачать руководство пользователя страница 3

Страница: 3 / 35

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

The following symbols are displayed on indoor and outdoor units.

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous

situations and ensure peak performance of your product

WARNING

It can result in serious injury or death when the directions are

ignored

CAUTION

It can result in minor injury or product damage when the

directions are ignored

WARNING

Installation

• Compliance with national gas regulations shall be observed.

• Do not use a defective or underrated circuit breaker. Use this

appliance on a dedicated circuit.
- There is risk of fire or electric shock.

• For electrical work, contact the dealer, seller, a qualified

electrician, or an Authorized Service Center.
- Do not disassemble or repair the product. There is risk of fire

or electric shock.

Read the precautions in this manual

carefully before operating the unit.

This appliance is filled with

flammable refrigerant (R32)

This symbol indicates that the

Operation Manual should be read

carefully.

This symbol indicates that a service

personnel should be handling this

equipment with reference to the

Installation Manual.

Содержание ARNU15GSJA4




































Результаты поиска

Содержание ARNU15GSJA4

Отзывы:

Похожие инструкции для ARNU15GSJA4

Бренды по названию

Популярные бренды

LG ARNU15GSJA4, Руководство по установке

Результаты поиска

Содержание ARNU15GSJA4

Отзывы:

Похожие инструкции для ARNU15GSJA4

Бренды по названию

Популярные бренды