LG ARNU12GSF14, Руководство по установке

Страница: 15 / 27

Installation Manual 15
Installation
ENGLISH
Check
1. Compare the flared work with the figure by.
2. If a flared section is defective, cut it off and do
flaring work again.
Indoor
Preparing the indoor unit's piping and drain hose for installation through the wall.
1. Route the indoor tubing and the drain hose in the
direction of rear left or right
2. Tape the tubing, drain hose and the connecting
cable. Be sure that the drain hose is located at the
lowest side of the bundle. Locating at the upper side
can cause drain pan to overflow inside the unit.
Inclined
Inside is shiny without scratches
Smooth all round
Even length
all round
Surface
damaged
Cracked Uneven
thickness
= Improper flaring =
Connecting the Piping
Drain hose
Power cable
Transmission
cable
Gas side
piping
Liquid side
piping
Drain hose
Loop
CAUTION
If the drain hose is routed inside the room, insulate the hose with an insulation
material* so that dripping from "sweating"(condensation) will not damage furniture or
floors.
*Foamed polyethylene or equivalent is recommended.
!