background image

Safety Precautions

6

Indoor Unit

CAUTION

n

Installation

Always check for gas (refrigerant) leakage
after installation or repair of product.

• Low refrigerant levels may cause

failure of product.

Install the drain hose to ensure that
water is drained away properly.

• A bad connection may cause

water leakage.

Keep level even when installing
the product.   

• To avoid vibration or water leak-

age.

n

Operation

Do not install the product where the noise
or hot air from the outdoor unit could dam-
age the neighborhoods.

• It may cause a problem for your

neighbors.

Use two or more people to lift and
transport the product. 

• Avoid personal injury.

Do not install the product where it
will be exposed to sea wind (salt
spray) directly.

• It may cause corrosion on the product.

Corrosion, particularly on the condenser
and evaporator fins, could cause product
malfunction or inefficient operation.

Do not expose the skin directly
to cool air for long periods of
time. (Don't sit in the draft.)

• This could harm to your health.

Do not use the product for special pur-
poses, such as preserving foods,
works of art, etc. It is a consumer air
conditioner, not a precision refrigera-
tion system.

• There is risk of damage or loss of property.

Do not block the inlet or outlet
of air flow.

• It may cause product failure.

Use a soft cloth to clean. Do not
use harsh detergents, solvents,
etc.

• There is risk of fire, electric

shock, or damage to the plastic
parts of the product.

Do not touch the metal parts of the
product when removing the air filter.
They are very sharp!

• There is risk of personal injury.

Do not step on or put anyting on
the product. (outdoor units)

• There is risk of personal injury

and failure of product.

Always insert the filter securely.
Clean the filter every two weeks or
more often if necessary.

• A dirty filter reduces the efficiency of

the air conditioner and could cause
product malfunction or damage.

Do not insert hands or other objects
through the air inlet or outlet while the
product is operated.

• There are sharp and moving parts

that could cause personal injury.

Do not drink the water drained
from the product.

• It is not sanitary and could cause se-

rious health issues.

If the liquid from the batteries gets onto your skin
or clothes, wash it well with clean water. Do not
use the remote if the batteries have leaked.

• The chemicals in batteries could cause burns or other

health hazards.

If you eat the liquid from the batteries, brush your
teeth and see doctor. Do not use the remote if the
batteries have leaked.

• The chemicals in batteries could cause burns or

other health hazards.

Use a firm stool or ladder when
cleaning or maintaining the
product.

• Be careful and avoid personal injury.

Replace the all batteries in the remote
control with new ones of the same type.
Do not mix old and new batteries or dif-
ferent types of batteries.

• There is risk of fire or explosion.

Do not recharge or disassemble
the batteries. 
Do not dispose of batteries in a
fire.

• They may burn or explode.

Содержание ARNU07GL1G2




















Отзывы: