LG APUQ50LT3E0 страница 4 Скачать руководство пользователя

Страница: 4 / 28

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

Operation

• Do not share the outlet with other appliances. It will cause an electric shock or a fire due to

heat generation.

• Do not use the damaged power cable. Otherwise, it may cause a fire or electric shock.

• Do not modify or extend the power cable randomly. Otherwise, it may cause a fire or electric

shock.

• Take care so that the power cable may not be pulled during operation. Otherwise, it may

cause a fire or electric shock.

• Turn off the unit if strange sounds, smell, or smoke comes from it. Otherwise, it may cause

electric shock or a fire.

• Keep the flames away. Otherwise, it may cause a fire.

• Do not use the power cable near the heating tools. Otherwise, it may cause a fire and electric

shock.

• Do not open the suction inlet of the indoor/outdoor unit during operation. Otherwise, it may

electric shock and failure.

• Do not allow water to run into electrical parts. Otherwise, it may cause the failure of machine

or electric shock.

• Do not touch the power cable with wet hands. It may cause electric shock and damage.

• Never touch the metal parts of the unit when removing the filter. They are sharp and may

cause injury.

• Do not step on the indoor/outdoor unit and do not put anything on it. It may cause an injury

through dropping of the unit or falling down.

• Do not place a heavy object on the power cable. Otherwise, it may cause a fire or electric

shock.

• When the product is submerged into water, always contact the service center. Otherwise, it

may cause a fire or electric shock.

• Take care so that children may not step on the outdoor unit. Otherwise, children may be seri-

ously injured due to falling down.

Содержание APUQ50LT3E0





























Результаты поиска

Содержание APUQ50LT3E0

Отзывы:

Похожие инструкции для APUQ50LT3E0

Бренды по названию

Популярные бренды

LG APUQ50LT3E0, Руководство по установке

Результаты поиска

Содержание APUQ50LT3E0

Отзывы:

Похожие инструкции для APUQ50LT3E0

Бренды по названию

Популярные бренды