LG ANEH053B1, Руководство по установке

Страница: 7 / 13

Installation Manual 7
CN_Pipe out (Red)
CN_Pipe in (White)
CN_EEV (White)
CN_Motor1 (White)
CN_EEV (White)
CN_Motor1 (White)
CN_Room (Yellow)
Control Box
Heater Panel
3. Assembly Diagram
3. Assembly Diagram
Step 1. Open upper front panel and control box cover. Step 2. Disconnect the three thermistors(CN_Pipe out, CN_Pipe in and
CN_Room) , CN_EEV and CN_Motor1 connector in control box.
Step 1. Open upper front panel and control box cover.
Step 3. Pull out control box. Remove heater panel.
Mounting bracket
Step 4. Remove the additional mounting bracket (shown
in the figure) while installing 5kW and 10kW
heater with NJ chassis.
Bracket
Slot
Step 5. Install heater. The bracket should be inserted in
the provided slot.
Step 6. Attach the heater to panel using the existing holes
and screws.
ENGLISH
Upper Front Panel
Control Box Cover Control Box Cover Control Box Cover