LG AK-Q180BC00 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 43

background image

3

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product

WARNING

It can result in serious injury or death when the directions are ignored

CAUTION

It can result in minor injury or product damage when the directions are ignored

WARNING

• Installation or repairs made by unqualified persons can result in hazards to you and others.

• Installation MUST conform with local building codes or, in the absence of local codes, with

the Nation Electrical Code NFPA 70/ANSI C1-1003 or current edition and Canadian Electrical
Code Part1 CSA C.22.1.

• The information contained in the manual is intended for use by a qualified service technician

familiar with safety procedures and equipped with the proper tools and test instruments.

• Failure to carefully read and follow all instructions in this manual can result in equipment mal-

function, property damage, personal injury and/or death.

Installation

• Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.

- There is risk of fire or electric shock.

• For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center.

- Do not disassemble or repair the product. There is risk of fire or electric shock.

• Always ground the product.

- There is risk of fire or electric shock.

• Install the panel and the cover of control box securely.

- There is risk of fire or electric shock.

• Always install a dedicated circuit and breaker.

- Improper wiring or installation may cause fire or electric shock

• Use the correctly rated breaker or fuse.

- There is risk of fire or electric shock.

• Use the specified wires to connect the unit.

- There is risk of fire or electric shock.

• Do not install, remove, or re-install the unit by yourself (customer).

- There is risk of fire, electric shock, explosion, or injury.

• Be cautious when unpacking and installing the product.

- Sharp edges could cause injury. Be especially careful of the case edges and the fins on the con-

denser and evaporator.

• For installation, always contact the dealer or an Authorized Service Center.

- There is risk of fire, electric shock, explosion, or injury.

• Do not install the product on a defective installation stand.

- It may cause injury, accident, or damage to the product.

!

!

!

SAFETY PRECAUTIONS

ENGLISH

«
1
2
3
4
5
...
»

Содержание AK-Q180BC00












































Отзывы:

Нет отзывов

Похожие инструкции для AK-Q180BC00

nanoe CZ-CNEXU1

Бренд: Panasonic Страницы: 108

Бренд: TCF Страницы: 19

Бренд: Haier Страницы: 56

Бренд: RollSeal Страницы: 44

Voyager RT-SVX17C-EN

Бренд: Trane Страницы: 80

Бренд: York Страницы: 12

MPS2-10CRN1-BH9

Бренд: Uberhaus Страницы: 24

Бренд: Carrier Страницы: 44

Бренд: Ballu Страницы: 46

Бренд: Carrier Страницы: 6

Бренд: Vaillant Страницы: 48

Бренд: Daikin Страницы: 17

Бренд: Olimpia splendid Страницы: 12

GWH18AAD-K6DNA1A/I

Бренд: Gree Страницы: 121

Бренд: Carrier Страницы: 37

Бренд: ulsonix Страницы: 21

Бренд: Galletti Страницы: 40

Бренд: WINTAIR Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды