ELECTRICAL CONNECTION
17
ENGLISH
ELECTRICAL CONNECTION
Model: PRLK048A0 / PRLK096A0
1
Open the terminal box cover(A).
2
Pass EEV cable(field supply, 6 wires) from the AHU Communication Kit through cable gland
and connect the cable wires into the terminal block (C) following instructions as describe in
step
3
Route the cable out of the EEV Kit box according to figure below and fix with the support tie
wrap(D).
4
Use a screw) and follow indicated instructions for connecting cable wires into the
terminal block according to the circuit diagram of AHU Communication Kit.
5
Make sure that field wiring and insulation are not squeezed when closing the cover plate of EEV
Kit.
6
Close the cover plate of EEV Kit.
A. Terminal box cover
B. Cable gland
C. Terminal block
D. Support tie wrap
E. Electric wiring work(filed
supply, 6 wires)
A
B
D
E
B
R
R
D
B
L
O
R
Y
L
W
H
EEV
C
Detail
E
NOTE
1. BR : BROWN
2. RD : RED
3. BL : BLUE
4. OR : ORANGE
5. YL : YELLOW
6. WH : WHITE
B
R
R
D
B
L
O
R
Y
L
W
H
EEV
Field work
Field connect wires
B
R
R
D
B
L
O
R
Y
L
W
H
EEV
<Field wiring part>
1
2 3 4 5 6
Detail
CAUTION
!
• Before connecting the wires(filed supply), make sure to compare with the wire colors
between EEV Kit and AHU Communication Kit.
• Make sure to connect the wires according to the circuit diagram in AHU Communication Kit.
• Use the ring type pin to connect to the terminal block.
