13
ENGLISH
ASSEMBLING AND PREPARING
CAUTION
•
Always use genuine components to ensure safety and product performance.
- The product warranty will not cover damage or injury caused by the use of counterfeit components.
•
Connect the power cord to the product before you plug it into a wall outlet.
- Plugging the power cord into a wall outlet first may cause an electric shock, which can damage the product.
•
When installing or using this product, be cautious of damaging the product or safety accident due to negligence.
•
If you do not fully understand the instructions in this manual, do not install the product and contact the service
centre.
•
Check the accessories provided with the model before installation.
- We will not be responsible for missing or damaged accessories after the internal packaging is damaged.
•
Keep out of reach of children, as various safety accidents such as suffocation can occur if an infant or child swallows
the accessories provided with the product.
•
Make sure that the screws are completely tightened.
- Tightening the screws with excessive force may damage the wall, degrade the performance and solidity of the
product, or damage the product.
•
Do not install display products that are heavier than the designated weight and make sure that external force is not
applied.
•
Be cautious of safety accidents when handling tools for installing the product.
•
Before installation, remove accessories (watch, bracelet, etc.) that can damage the coloured, transparent film.
•
Applying excessive force may damage the product.
•
There is no problem if fine bubbles are not visible to the naked eye at a distance of 1 m from the light-emitting
surface of the product.
NOTE
•
The accessories provided with your product may vary depending on the model.
•
Product specifications or contents in this manual may be changed without prior notice due to upgrade of product
functions.
•
The warranty will not cover any damage caused by using the product in an excessively dusty environment.
•
Up to 4 films are supported per 210 W adapter.
•
Up to 18 1st bezel kits can be connected to a LAN port.
•
Up to 26 common bezel kits can be supported by a 1st bezel kit.
•
For adapter cable extension, use an approved standard cable.
