37
ENGLISH
FRANÇAIS
ESP
AÑOL
Symptoms
Possible Causes & Solution
The air
conditioner
does not emit
cool air.
Air is not circulating properly.
•
Make sure that there are no curtains, blinds, or pieces of furniture
blocking the front of the air conditioner.
The air filter is dirty.
•
Clean the air filter once every 2 weeks.
•
See “Clean the Air Filter” for more information.
The room temperature is too high.
•
In summer, cooling the indoor air fully may take some time. In this
case, select the Jet Mode to cool the indoor air quickly.
Cold air is escaping from the room.
•
Make sure that no cold air is escaping through the ventilation
points in the room.
The desired temperature is higher than the current
temperature.
•
Set the desired temperature to a level lower than the current
temperature.
There is a heating source nearby.
•
Avoid using heat generators like electric ovens or gas burners
while the air conditioner is in operation.
Fan Mode is selected.
•
During Fan Mode, air blows from the air conditioner without
cooling or heating the indoor air.
•
Switch the operation mode to cooling operation.
Outside temperature is too high.
•
The cooling effect may not be sufficient.
The fan speed
cannot be
adjusted.
The Jet Mode, or Auto Operation Mode is selected.
•
In some operation modes, you cannot adjust the fan speed. Select
an operation mode in which you can adjust the fan speed.
The temperature
cannot be
adjusted.
The Fan Mode or Jet Mode is selected.
•
In some operation modes, you cannot adjust the temperature.
Select an operation mode in which you can adjust the
temperature.
