LG ABNW18GM1 Series, Руководство по установке

Страница: 18 / 28

18
INSTALLATION INSTRUCTION
ENGLISH
Installer Setting - Test Run Mode
After installing the product, you must run a Test Run mode.
For details related to this operation, refer to the product manual.
TEMP
FAN
SPEED
OPER
MODE
When pressing the button and
button simultaneously for more than 3
seconds, the system will be entered
into the installer setting mode.
- After entering into the installer setting
mode, select the test run mode code
value by pressing the button.
* Test run mode code value : 01
1
When pressing the button, the test
operation mode will be performed, and it
is displayed as shown in the left figure. 2
When pressing the button and
button simultaneously for more than 3
seconds after the setting has been
completed, the setting mode will be
released.
- If there isn’t any button input for
more than 25 seconds, the installer
setting mode will also be released.
3
When approx. 18 minutes are elapsed
after starting of the test oper-mode, the
system will be stopped automatically
and converted to the standby state.
- If any button is inputted during the
test run mode, the test run mode will
be forced to be relreased.
4
OPER
MODE
OPER
MODE
OPER
MODE
OPER
MODE
What is the test run mode?
- This means the operation of the product under the cooling, strong wind, and Comp on state
without performing room temperature control in order to confirm the installed state during the
product installation.