LG ABNW18GM1 Series, Руководство по установке

Страница: 17 / 28

INSTALLATION INSTRUCTION
ENGLISH
17
Installer Setting - How to enter installer setting mode
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user
injury or property damage. This must be set by an certificated installer, and any installation
or change that is carried out by a non-certificated person should be responsible for the
results. In this case, free service cannot be provided.
TEMP
FAN
SPEED
OPER
MODE
Function Code
Value
If you want to set installer setting mode,
Press the Temperature up button and the oper
mode button same time for five seconds.
1
When you enter the setting mode
Initially. Function code is displayed
on the LCD screen. 2
<Installer Setting Code Table>
General air-conditioner product
No. Function Code Value
1 Test Run 01 01:Set
2 Address Setting 02 00~FF : Address
<ESP Step> <ESP Value><Example>
01:VeryLow 0 ~ 255
02:Low
3 E.S.P. Value 03
03:Med
04:High
05:Very High
01:Remo
4 Thermistor 04 02:Indoor
03:2TH
01:Med
02:Low
5 Ceiling Height 05
03:High
04:Very High
01:V-H
02:F-H
6 Static Pressure 06
03:V-L
04:F-L
7 Master Setting 07
00:Slave
01:Master
8
Celsius
12
00:Celsius
(Optimized only for U.S.A)
Fahrenheit Switching 01:Fahrenheit
9
Static Pressure
32
00: use static pressure (code 06) set value
Step 01~ 11: static pressure step (code 32) set value
Function Code ESP value ESP step
* Some contents may not be displayed depending on the product function
CAUTION
!