FORMING THE PIPING
Form the piping by wrapping the connect-
ing portion of the indoor unit with insula-
tion material and secure it with two kinds
of vinyl tape.
- If you want to connect an additional drain
hose, the end of the drain outlet should be
routed above the ground. Secure the drain
hose appropriately.
In cases where the outdoor unit is installed
below the indoor unit perform the follow-
ing.
1
Tape the piping, drain hose and connecting
cable from down to up.
2
Secure the tapped piping along the exterior
wall using saddle or equivalent.
In cases where the Outdoor unit is installed
above the Indoor unit perform the follow-
ing.
1
Tape the piping and connecting cable from
down to up.
2
Secure the taped piping along the exterior
wall. Form a trap to prevent water entering
the room.
3
Fix the piping onto the wall by saddle or
equivalent.
20
FORMING THE PIPING
ENGLISH
• Trap is required to prevent water from entering
into electrical parts.
Taping
Drain hose
Pipings
Connecting
cable
Power supply
cord
Plastic
Plastic
band
band
Plastic
band
Seal a small
Seal a small
opening around
opening around
the pipings with
the pipings with
gum type sealer.
gum type sealer.
Seal a small
opening around
the pipings with
gum type
sealant.
Trap
Seal a small opening
around the pipings
with gum type sealer.
OUTDOOR
OUT
DO
OR
UNIT
UNIT
OUTDOOR
UNIT
OUT
DO
OR
UNIT
Trap
Plastic
band
Seal a small
opening around
the pipings with
gum type sealer.
Trap
Trap
Trap
Seal a small opening
Seal a small opening
around the pipings
around the pipings
with gum type sealer.
with gum type sealer.
Seal a small opening
around the pipings
with gum type sealant.
OUT
DO
OR
UNIT
OUTDOOR
OUT
DO
OR
UNIT
UNIT
OUTDOOR
UNIT
Содержание AB-W3067SA3
Страница 37: ......