background image

ENGLISH

3

Safety instructions

Please read these safety precautions carefully before 
using the product.

 WARNING

Do not place the TV and/or remote control in the following 
environments:

•  A location exposed to direct sunlight
•  An area with high humidity such as a bathroom
•  Near any heat source such as stoves and other devices that 

produce heat

•  Near kitchen counters or humidifiers where they can easily be 

exposed to steam or oil

•  An area exposed to rain or wind
•  Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product 
deformation.

Do not place the product where it might be exposed to dust.  This may 
cause a fire hazard.

Mains Plug is the TV connecting/disconnecting device to AC mains 
electric supply. This plug must remain readily attached and operable 
when TV is in use.

Do not touch the power plug with wet hands. Additionally, if the cord 
pin is wet or covered with dust, dry the power plug completely or wipe 
dust off.  You may be electrocuted due to excess moisture.

Make sure  to connect Mains cable to compliant AC mains socket with 
Grounded earth pin. (Except for devices which are not grounded on 
earth.) Otherwise possibility  you may be electrocuted or injured.

Insert power cable  plug completely into wall socket otherwise if not 
secured completely into socket, fire ignition may break out.

Ensure the power cord does not come into contact with hot objects 
such as a heater.  This may cause a fire or an electric shock hazard.

Do not place a heavy object, or the product itself, on power cables.  
Otherwise, this may result in fire or electric shock.

Bend antenna cable between inside and outside building to prevent 
rain from flowing in.  This may cause water damaged inside the Product 
and could give an electric shock.

When mounting TV onto wall make sure to neatly install and isolate 
cabling from rear of  TV as to not create possibility of electric shock /
fire hazard.

Содержание 65UH600T

































Отзывы: