LG 65LX761H.AHK, Руководство по установке

Страница: 17 / 40

17
INSTALLATION MENU
ENGLISH
Menu display
y
Function to decide whether work with menu (including relevant menus too) of control key (Yes – Enter possible) or not (No – Enter Impossible).
- Although select No(Enter impossible), the action that press a Menu button for 5 seconds to enter ‘Installation Menu’ is available.
- When select Yes(Enter possible), Menu works.
OSd display
y
Decide to display OSD or not by setting ‘OSD Display’ as Yes(Display) or No(Do not Display).
- When ‘OSD Display’ is set to ‘No’(Do not Display), all OSD is not displayed except some exception.
- Although select ‘No’ (Do not Display), the action that press a Menu button for 5 seconds to enter ‘Installation Menu’ and entering service
menu are available. (In-Start, Power-Only, Adjust, Installation Menu…)
System Provider Mode
y ‘System Provider Mode’ allows access to the menu system from the front panel or remote control but access is controlled as follows:
-
When value is ‘Yes’, Accessible Items on the menu system, others are not permissible.
»
Input select screens
» Sleep timer
» Aspect Ratio
» Closed Caption
» ‘Lock’ / ‘My Media’ / ‘Network’ / ‘Support’ / ‘Bluetooth’ Menu
-
‘Q.menu’, which is related to ‘Setup’ Menu, is not accessible.
- If the channel map is empty, ‘Auto-tuning’ guide dialog should be blocked by pressing ‘List’, ‘Fav’, ‘CH+’, ‘CH-’ keys.
dTV Programme update
-
It is a mode to set whether to update dtv Programme automatically or not.
- When DTV Programme Update is set to ‘Auto’, the function to update TV’s programme map according to dtv programme’s stream information.
-
DTV Programme Update is set to ‘Manual’, the function to keep TV’s programme map even though dtv programme’s information is changed.
Power On default
-
Set the channel to display and Volume Level, etc. when turn on power in AC Power On or Stand-by status.
- Set to Yes(Work) or No(Do Not Work).
-
When ‘Power On Default’ is set to No, it is not applied to the subordinate Programme, Volume,
A/V Setting menu.
- When Power On Default is set to Yes, it can set by entering the subordinate menu.
Power Management
- If there is no input the amount of time that is set via the remote control or local key after the TV is turned on, TV is turned off automatically.
-
The default setting is “Off”.