12 Plasma TV
Installation
NOTE: All cables shown are not included with the TV
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV
- Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time.
Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may
remain visible on the screen.
Connection Option 1
Set VCR output switch to 3 or 4 and then tune
TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from the
VCR's output jacks to the TV input jacks, as
shown in the figure.
When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
If you connect an S-VIDEO output from VCR to
the S-VIDEO input, the picture quality is
improved; compared to connecting a regular
VCR to the Video input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s
manual.)
3. Select the input source with using the
TV/VIDEO
button on the remote control. (If
connected to A/V INPUT 1, select
Video 1
input source)
Do not connect to both Video and
S-Video at the same time.
VCR Setup
VCR Setup
RGB INPUT
Antenna 1
Antenna 2
AUDIO INPUT
DVI INPUT
S-VIDEO
REMOTE
CONTROL
AUDIO INPUT
AUDIO
VIDEO
VIDEO INPUT
DIGITAL AUDIO
(OPTICAL)
COMPONENT 2
MONITOR
OUTPUT
A/V
INPUT1
DVD
/DTV
INPUT
COMPONENT 1
DVI
INPUT
R
L
R
L
COMPONENT1
INPUT
OUTPUT
S-VIDEO
OUT
IN
(R) AUDIO (L)
VIDEO
3
4
OUTPUT
SWITCH
ANT OUT
ANT IN
(MONO)
RS-232C INPUT
(CONTROL/SERVICE)
- After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming.
The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV.
- For further information regarding cable TV service, contact your local cable TV service provider(s).
Connection Option 1
1. Select 3 or 4 with channel switch on cable
box.
2. Tune the TV channel to the same selected
output channel on cable box.
3. Select channels at the cable box or with the
cable box remote control.
Connection Option 2
1. Connect the audio and video cables from the
Cable Box's output jacks to the TV input jacks,
as shown in the figure.
When connecting the TV to a Cable Box,
match the jack colors (Video = yellow, Audio
Left = white, and Audio Right = red).
2. Select the input source with using the
TV/VIDEO
button on the remote control. (If
connected to A/V INPUT 1, select
Video 1
input source)
3. Select your desired channel with the remote
control for cable box.
Cable
Cable
TV Setup
TV Setup
RGB INPUT
Antenna 1
Antenna 2
AUDIO INPUT
DVI INPUT
S-VIDEO
REMOTE
CONTROL
AUDIO INPUT
AUDIO
VIDEO
VIDEO INPUT
DIGITAL AUDIO
(OPTICAL)
COMPONENT 2
MONITOR
OUTPUT
A/V
INPUT1
DVD
/DTV
INPUT
COMPONENT 1
DVI
INPUT
R
L
R
L
COMPONENT1
INPUT
OUTPUT
TV
VCR
RF
Cable
(R) AUDIO (L)
VIDEO
3
4
OUTPUT
SWITCH
(MONO)
RS-232C INPUT
(CONTROL/SERVICE)
VCR
Cable Box
1
2
1
2
