background image

11

ENGLISH

_inde

x

 

Do not use high voltage electrical goods near the product (e.g., a bug zapper).

 - This may result in product malfunction if it receives an electrical shock.

 

If there is a gas leak, do not touch the outlet, and open the windows for ventilation.

 - Otherwise, the product may cause fire or electric shock.

 

If you drop the product or the case is broken, turn off the product and unplug the power cord.

 - If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service centre.

 

Keep small accessories out of the reach of children.

 - If a child swallows it, consult a doctor immediately.

 

Keep out of reach of children from the product. Also, do not throw toys or objects at the product or screen.

 - It can cause injury to human, problem to product and damage the screen.

 

All the power sources must be disconnected by removing the power cables to remove all power from the unit.

 CAUTION

 

This panel is an advanced product that contains millions of pixels. You may occasionally see pixel spots when viewing 

the screen. Since these deactivated pixels are not a defect, the performance and reliability of the product is not 

affected.

 

Do not put or store inflammable substances near the product.

 - There is a danger of explosion or fire.

 

Keep the proper distance from the product.

 - It can cause damage to your vision if you look at the product too closely.

 

Set the appropriate resolution and frequency by products.

 - It can cause damage to your vision.

 

Take a regular break when working with the product for a long time.

Содержание 55EW5G









































Отзывы: