7
ENGLISH
_inde
x
•
Avoid touching the screen at all times, as this may result in
damage to the screen.
•
Do not place the product on the floor with its front facing
down without padding. Failure to do so may result in
damage to the screen.
•
When attaching the stand to the TV set, place the screen
facing down on a cushioned table or flat surface to protect
the screen from scratches.
Mounting on a Table
1 Lift and tilt the TV into its upright position on a table.
•
Leave a minimum of 10 cm (4 inches) space from the wall for
proper ventilation.
10 cm
10 cm
(4 inches)
10 cm
10 cm
10 cm
(Depending upon model)
2 Connect the power cord to a wall outlet.
•
Do not apply foreign substances (oils, lubricants, etc.) to
the screw parts when assembling the product. (Doing so
may damage the product.)
•
If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.
•
Do not use any unapproved items to ensure the safety and
lifespan of the product.
•
Any damages or injuries by using unapproved items are not
covered by the warranty.
•
Make sure that the screws are fastened tightly. (If they are
not fastened securely enough, the TV may tilt forward after
being installed.)
•
Do not fasten the screws with excessive force otherwise
they may strip and become loose.
Securing TV to the Wall
(Depending upon model)
1 Insert and tighten the eye-bolts or TV brackets and bolts on the back
of the TV.
•
If there are bolts inserted at the eye-bolts position, remove the
bolts first.
2 Mount the wall brackets with the bolts to the wall. Match the
location of the wall bracket and the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or
cable. Make sure to keep the rope parallel to the flat surface.
•
Use a platform or cabinet that is strong and large enough to
support the TV securely.
•
Brackets, bolts, and ropes are optional. You can obtain additional
accessories from your local dealer.
