SPECIFICATIONS / EXTERNAL CONTROL DEVICE SETUP
ENG
ENGLISH
37
MAINTENANCE / TROUBLESHOOTING
3D supported mode manually
Input
Signal
Playable 3D video format
Resolution
Horizontal
Frequency (kHz)
Verticla
Frequency (Hz)
DTV
HD / SD
-
-
2D to 3D, S/S (Half), T&B
ATV(CVBS)
SD
-
-
Component
HD / SD
-
-
HDMI-PC
1024 x 768
48.36
60
1360 x 768
47.71
1920 x 1080
67.5
2D to 3D, S/S (Half), T&B, C/B,
F/S, R/I, C/I
Others
-
-
2D to 3D, S/S (Half), T&B
HDMI-DTV
480P
31.5
60
2D to 3D, S/S (Half), T&B, C/B, F/S,
R/I, C/I
576P
31.25
50
720p
37.5
50
45
60
1080i
28.12
50
2D to 3D, S/S (Half), T&B
33.75
60
1080p
27
24
2D to 3D, S/S (Half), T&B, C/B,
R/I, C/I
28.12
25
33.75
30
56.25
50
2D to 3D, S/S (Half), T&B,
C/B, F/S, R/I, C/I
67.5
60
USB ,DLNA
(Movie)
Under 704 x 480
-
-
2D to 3D
Over 704 x 480
interlaced
-
-
2D to 3D, S/S (Half), T&B
Over 704 x 480
progressive
-
50 / 60
2D to 3D, S/S (Half), T&B,C/B, F/S, R/
I, C/I
-
others
2D to 3D, S/S (Half), T&B, C/B, R/I, C/
I
USB, DLNA
(Photo)
Under 320 x 240
-
-
2D to 3D
Over 320 x 240
-
-
2D to 3D, S/S (Half), T&B
Miracast™ /
WiDi
1024 x 768p
-
30 / 60
2D to 3D, S/S (Half), T&B
1280 x 720p
-
30 / 60
1920 x 1080p
-
30 / 60
Others
-
-
2D to 3D
EXTERNAL CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit ‘www.lg.com’.
MAINTENANCE
Cleaning Your TV
Clean your TV regularly to keep it at peak performance and to extend the product lifespan.
y
y
Make sure to turn the power off and disconnect the power cord and all other cables first.
y
y
When the TV is left unattended or unused for a long time, disconnect the power cord from the
wall outlet to prevent possible damage from lightning or power surges.
CAUTION
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
y
y
Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
scratches on the screen and image distortions.
y
y
Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air
fresheners, lubricants, as these may damage the screen’s finish and cause discoloration.
y
y
Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock,
or malfunction.
CAUTION
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the TV with
the remote control.
y
y
Check the remote control sensor on the product and try again.
y
y
Check if there is any obstacle between the product and the remote control.
y
y
Check if the batteries are still working and properly installed (
to
,
to
).
No image display and no
sound is produced.
y
y
Check if the product is turned on.
y
y
Check if the power cord is connected to a wall outlet.
y
y
Check if there is a problem in the wall outlet by connecting other products.
The TV turns off suddenly.
y
y
Check the power control settings. The power supply may be interrupted.
y
y
Check if the Auto sleep feature is activated in the Time settings.
y
y
If there is no signal while the TV is on, the TV will turn off automatically after 15
minutes of inactivity.