LG 43UV570H Скачать руководство пользователя страница 41

Страница: 41 / 95

206-4325

Custom Master TV Setup

This section describes how to create a customized Master TV Setup for cloning purposes when

the TV is in Pass-through Mode. All cloning (export and import) processes on the TV are performed

via USB memory device / “.tlx” file.

The Master TV Setup may be exported to a Clone (.tlx) file,

which can then be used (i.e., imported) to configure either TVs that are to remain in Pass-through

Mode or TVs that are to be configured for FTG Mode via CPU.
Cloning requirements and procedures are described in detail on pages 44 to 49.

Note:

You can also use the Cloud Configuration Tool to create an FTG Configuration (.tlx) file for

FTG Mode via CPU configuration/cloning purposes, if desired (see pages

50 to 53). However, it

is not possible to customize TV setup menu settings in the Cloud Configuration Tool. If you wish

to include customized TV setup menu settings in the TV configuration, in addition to the channel

lineup and Installer Menu settings, perform the Master TV Setup procedure to create a Clone (.tlx)

configuration file.

Note:

UV572H TVs have a different chassis ID than UV570H TVs. You cannot use a UV570H

Master TV Setup to configure a UV572H TV and vice versa.

Before You Begin

• It is recommended that you disconnect all Aux inputs if you intend to run Auto Tuning (Channel

Search). Under certain conditions, Auto Tuning is disabled if there is an Aux input active.

•

A Clone (.tlx) file comprises

Installer Menu settings, IP Environment Menu settings (with the

exception of unique TV attributes and settings), and all TV sources’ (analog, digital, AV, HDMI,

etc.) clonable setup menu settings. See also “Clonable TV Setup Menu Features” list below.

•

If the “.tlx” file (either a Clone or FTG Configuration file) to be imported on the Target TV(s)

contains an FTG Channel Map, the Target TV(s) will be configured for FTG Mode via CPU,

though as part of the import process, you will have the option to select either logical or physical

channel tuning. If you would like the Target TV(s) to remain in Pass-through Mode, the “.tlx” file

should not include an FTG Channel Map.

Clonable TV Setup Menu Features

Picture

Smart Picture Mode

Picture Mode Settings

Sound

Smart Sound Mode

Sound Mode Settings

Volume Mode

AV Sync Adjust

Channels

Channel Tuning

Channel Manager

Channel Label

General

Language

Time & Date

−

Clock Mode (Auto/Manual)

−

Time Zone

Timers (No Signal Power Off)

Standby Light

Accessibility

Menu Transparency

Closed Caption

Audio Guidance

TV Power Sound

High Contrast

Note:

Some menu options vary between analog and digital channels and Aux inputs.

Note:

The Quick Settings Menu is initially displayed when you press

MENU SETTINGS

on the

Installer Remote. Select the

All Settings

menu icon to access the advanced TV setup menus.

Several advanced settings are duplicated in the Quick Settings Menu.

Содержание 43UV570H
































































































Результаты поиска

Содержание 43UV570H

Отзывы:

Похожие инструкции для 43UV570H

Бренды по названию

Популярные бренды

LG 43UV570H, Руководство по установке

Результаты поиска

Содержание 43UV570H

Отзывы:

Похожие инструкции для 43UV570H

Бренды по названию

Популярные бренды