LG 43UM7000PLA, Руководство пользователя

Страница: 9 / 115

LG Electronics is not responsible for any network connection problems or any faults,
malfunctions, or errors caused by network connection.
The network connection may not work properly because of network settings or the Internet
service provider.
DSL service must use a DSL modem; and cable service must use a cable modem. Since
only a limited number of network connections may be available, TV network setting may not
be used depending on the contract with Internet service provider. (If the contract does not
allow more than one device per line, only the already-connected PC may be used.)
A wireless network can experience interference from other devices that use the 2.4 GHz
frequency (wireless phone, Bluetooth device, or microwave oven). Although interference
can also happen when using the 5 GHz frequency, it is less likely to occur.
The wireless environment can make wireless network service run slowly.
Failure to turn off all local home networks may cause excessive traffic on some devices.
The access point device must support wireless connections and wireless connection
feature must be enabled on the device to have AP (access point) connection. Contact the
service provider for availability of wireless connections on the access point.
Check SSID and security settings of the AP. Refer to the appropriate documentation for
SSID and security settings of the AP.
Invalid settings of network devices (wired / wireless line sharer, hub) can cause the TV to
operate slowly or not operate properly. Install the devices correctly according to the
appropriate manual and network.
The connection method may differ depending on the AP manufacturer.
To solve a problem related to this function, refer to the Troubleshooting section of User
Guide .
About User Guide
For information on each feature of the LG webOS TV, consult the User Guide available
on the TV.
If you press in the top right of the screen, a brief instruction for the user guide is
shown.
If the function description screen of the
User Guide has , press to go to the
corresponding function or setting directly.
Text colour in this User Guide is used to indicate the following:
The images and information in the
User Guide
may differ depending on the model and
operating environment.
■ Red : the names of the remote control buttons.
●
■ Yellow : the buttons and the text to be displayed on the TV screen.
●
■ Green : the names of the TV input connectors.
●
9