background image

ENG

ENGLISH

25

INSTALLATION MENU

Media Type

 

-

Sets the medium type to RF or IP. 
The default value is RF.

RF

F

   

Data Channel Freq(KHz)

 

-

Sets the RF frequency at which the Pro:Centric data is received.

Data Channel Type

 

-

Sets the RF modulation type to DVB-T or DVB-C. 
The default value is DVB-C.

IP

P:C IP Setting

 

-

Server Address is set to IP Address

(IP a)

Sets the first number in the IPv4 address.

(IP b)

Sets the second number in the IPv4 address.

(IP c)

Sets the third number in the IPv4 address.

(IP d)

Sets the fourth number in the IPv4 address.

(Port)

Sets the actual port number where the Pro:Centric server is running.

 

-

Server Address is set to Domain Name 

(Domain Name) Sets the domain name where the Pro:Centric server is running.

(Port)

Sets the actual port or number where the Pro:Centric server is running.

 

-

The default value of IP a/b/c/d is 0 and the range is between 0 and 255. The default value of Port is 0 and the range is 
between 0 and 65535. 

Receive Data

 

-

 Sets Enable or Disable. When it is set to Disable, all the sub items are disable.

Room Number Setting

 

-

Press the ‘

OK

’ button in Room Number Setting item to go to the ‘Change a room number’ menu.

 

-

You can set or change Label and Room Number using the Room Number Setting.

Native EPG

Disable

Enable

 

-

You can use the TV Guide Application in Pro:Centric.

 

Содержание 43LX761H











































Отзывы: