ENGLISH
7
•
Do not apply foreign substances (oils,
lubricants, etc.) to the screw parts when
assembling the product. (Doing so may
damage the product.)
•
If you install the TV on a stand, you need to
take actions to prevent the product from
overturning. Otherwise, the product may fall
over, which may cause injury.
•
Do not use any unapproved items to ensure
the safety and product life span.
•
Any damage or injuries caused by using
unapproved items are not covered by the
warranty.
•
Make sure that the screws are fastened
tightly. (If they are not fastened securely
enough, the TV may tilt forward after being
installed.)
•
Do not fasten the screws with excessive
force otherwise they may be worn out and
become loose.
Using the Kensington Security
System (optional)
(Depending upon model)
The Kensington security system connector is located
at the rear of the TV. For more information of
installation and using, refer to the manual provided
with the Kensington security system or visit
http://
www.kensington.com
. Connect the Kensington security
system cable between the TV and a table.
•
The Kensington security system is optional. You can
obtain additional accessories from your local dealer.
Securing TV to the Wall
(Depending upon model)
1
Insert and tighten the eye-bolts or TV brackets and
bolts on the back of the TV.
-
If there are bolts inserted at the eye-bolts position,
remove the bolts first.
2
Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-
bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly with
a sturdy rope or cable. Make sure to keep the rope
parallel to the flat surface.
•
Use a platform or cabinet that is strong and large
enough to support the TV securely.
•
Brackets, bolts, and ropes are optional. You can
obtain additional accessories from your local dealer.
