13
ENGLISH
How to deregister the Magic Remote
(BACK)
(Home)
Press the
(BACK) and
(Home) at
the same time, for five seconds, to unpair
the Magic Remote with your TV.
Pressing and holding the (EXIT to LIVE)
button will let you cancel and re-register
Magic Remote at once.
How to use Magic Remote
y
Shake the Magic Remote slightly to the
right and left or press
(Home), ,
buttons to make the pointer appear
on the screen. (In some TV models, the
pointer will appear when you turn the
Wheel button.)
y
If the pointer has not been used for a
certain period of time or Magic Remote
is placed on a flat surface, then the
pointer will disappear.
y
If the pointer does not move as you
wish, shake Magic Remote to the left
and right. The pointer will move to the
center of the screen.
y
The Magic Remote depletes batteries
faster than a normal remote due to the
additional features.
Precautions to Take when Using the
Magic Remote
y
y
Use the Magic remote within the maximum
communication distance (10 m). Using the
remote control beyond this distance, or
with an object obstructing it, may cause a
communication failure.
y
y
A communication failure may occur due to
nearby devices. Electrical devices such as a
microwave oven or wireless LAN product may
cause interference, as these use the same
bandwidth (2.4 GHz) as the Magic remote.
y
y
The Magic remote may be damaged or may
malfunction if it is dropped or receives a heavy
impact.
y
y
Take care not to bump into nearby furniture or
other people when using the Magic remote.
y
y
Manufacturer and installer cannot provide
service related to human safety as the applicable
wireless device has possibility of electric wave
interference.
y
y
It is recommended that an Access Point (AP) be
located more than 1 m away from the TV. If the
AP is installed closer than 1 m, the Magic remote
may not perform as expected due to frequency
interference.
Licenses
Supported licenses may differ by model.
For more information about licenses,
visit
www.lg.com.
Open Source Software
Notice Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit
http:// opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to
[email protected]. This offer is valid for three
(3) years from the date on which you purchased the
product.
Troubleshooting
y
y
Cannot control the TV with the remote control.
- Check the remote control sensor on the
product and try again.
- Check if there is any obstacle between the
product and the remote control.
- Check if the batteries are still working and
properly installed ( to , to )
