LG 42PX7DC, Руководство по обслуживанию, Страница: 11 / 51

- 11 -
6. PTC MICOM Download
6-1. PTC MICOM JIG
(1) Connect the power.
(2) Connect the jack(No. 1) to PTC Micom.
(3) Connect the USB Cable(No. 2) and computer.
(4) Execute download program(SAP Configuration)
[
(Caution) PTC Download JIG can save Download file in the
inside memory by Download Program(SAP Configuration).
Because it has a memory chip inside.
After saving the file, you can download it by just pressing
Start button (number 4.).
6-2. Download program(SAP Configuration)
Execute
(1) Select the HC12.
(2) Specify Algorithm: Select the 9S12dt128_128k.12P file.
(3) Specify S Record: Select the Download file.
(4) Check the check box of Erase Device, Blank Check
Device, Porgram Device, Verify Device.
[
(Caution) Don’t check anywhere except one like picture as
shown.
(5) Press “Save Image to Cyclone PRO” button.
And then the file is downloaded to Download JIG from PC.
(6) When Download is finished, you can download the file by
press “start” button on Download JIG.
At first, you download the file, you should not download it
again.
ADJUSTMENT INSTRUCTIONS
Micom
Micom
Jig
Jig
3. 3.
4. Start
4. Star t
Micom
Micom
Jig
Jig
3. 3. Power
2. Connect Computer 1. Connect Micom port of TV board
4. Start
4. Star t Button
<SAP Configuration Process>
<Execute SAP Configuration>
<Picture is downloaded to Download JIG>
(Connect red line (a part of arrow) to port 1)