5
•
Do not apply foreign substances (oils, lubricants, etc.) to the screw parts
when assembling the product. (Doing so may damage the product.)
•
If you install the TV on a stand, you need to take actions to prevent the
product from overturning. Otherwise, the product may fall over, which
may cause injury.
•
Do not use any unapproved items to ensure the safety and lifespan of
the product.
•
Any damages or injuries by using unapproved items are not covered by
the warranty.
•
Make sure that the screws are fastened tightly. (If they are not fastened
securely enough, the TV may tilt forward after being installed.)
•
Do not fasten the screws with excessive force otherwise they may strip
and become loose.
Securing TV to the Wall
(Depending upon model)
1 Insert and tighten the eye-bolts or TV brackets and bolts on the back of
the TV.
•
If there are bolts inserted at the eye-bolts position, remove the bolts
first.
2 Mount the wall brackets with the bolts to the wall. Match the location of
the wall bracket and the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or
cable. Make sure to keep the rope parallel to the flat surface.
•
Use a platform or cabinet that is strong and large enough to support the
TV securely.
•
Brackets, bolts, and ropes are optional. You can obtain additional
accessories from your local dealer.
Mounting to the Wall
(Depending upon model)
An optional wall mount can be used with your LG Television. Consult with
your local dealer for a wall mount that supports the VESA standard used by
your TV model. Carefully attach the wall mount bracket at the rear of the TV.
Install the wall mount bracket on a solid wall perpendicular to the floor. If
you are attaching the TV to other building materials, please contact qualified
personnel to install the wall mount. Detailed instructions will be included
with the wall mount. We recommend that you use an LG brand wall mount.
The LG wall mount is easy to adjust or to connect the cables. When you do
not use LG’s wall mount bracket, use a wall mount bracket where the device
is adequately secured to the wall with enough space to allow connectivity to
external devices. If you are using a non-adjustable mount, attach the mount
to the wall. Attach the cables to the TV first, then attach the TV to the mount.
•
Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse.
•
For more information of screws and wall mount bracket, refer to the
Separate Purchase.
•
If you intend to mount the product to a wall, attach VESA standard
mounting interface (optional parts) to the back of the product. When
you install the set to use the wall mounting bracket (optional parts), fix
it carefully so as not to drop.
•
When mounting a TV on the wall, make sure not to install the TV by
hanging the power and signal cables on the back of the TV.
•
Do not install this product on a wall if it could be exposed to oil or oil
mist. This may damage the product and cause it to fall.
•
When installing the wall mounting bracket, it is recommended to cover
the stand hole using tape, in order to prevent the influx of dust and
insects (Depending upon model).
Antenna/Cable
Connect an antenna, cable, or cable box to watch TV while referring to the
following. The illustrations may differ from the actual items and an RF cable
is optional.
Copper wire
•
Make sure not to bend the copper wire of the RF cable.
•
Complete all connections between devices, and then connect the power
cord to the power outlet to prevent damage to your TV.
•
To improve the picture quality in a poor signal area, purchase a signal
amplifier.
•
Use a signal splitter to use 2 TVs or more.
•
If the antenna is not installed properly, contact your dealer for assistance.
•
DTV Audio Supported Codec (Depending upon country) : MPEG, AAC,
HE-AAC, Dolby Digital, Dolby Digital Plus
•
This TV cannot receive Ultra HD (3840 x 2160 pixels) broadcasts directly
because the related standards have not been confirmed (Depending
upon country).
•
Use the AV cover for aesthetic purposes. Connecting too many cables
may cause lifting problems. In such a case, remove the AV cover before
use (Depending upon model).
