background image

- 6 -

Copyright              LG Electronics. Inc. All right reserved. 
Only for training and service purposes

LGE Internal Use Only

C

2008

SPECIFICATION

NOTE : Specifications and others are subject to change without notice for improvement.

4. General Specification(TV) 

No. Item 

Specification 

Remark 

1. 

Receiving System

1) ATSC / NTSC-M 

2. 

Available Channel 

1) VHF : 02~13 

2) UHF : 14~69 

3) DTV : 02-69 

4) CATV : 01~135 

5) CADTV : 01~135 

3. 

Input Voltage 

AC 100 ~ 240 V/50Hz, 60Hz 

4. Market

NORTH 

AMERICA

5. 

Screen Size

42 inch Wide(1920x1080) 

42LG70 

47 inch Wide(1920x1080)

47LG70 

52 inch Wide(1920x1080)

52LG70

6. Aspect 

Ratio

16:9

7. Tuning 

System

FS

8. Module 

LC420WUD-SAA1 

42LG70 

LC470WUD-SAA1  

47LG70 

LK520D3LZ1X

52LG70 

9.

Stand by 

1W

10. 

Operating Environment

1) Temp   :  0 ~ 40 deg

2) Humidity :   ~ 80 %  

11. 

Storage Environment

1) Temp   : -20 ~ 60 deg 

2) Humidity :   ~ 85 %  

1. Application Range.  

This spec sheet is applied to the 42"/47"/52" LCD TV used
LA86A chassis.  

2. Specification 

Each part is tested as below without special appointment  

2.1 Temperature :  25±5°C(77±9°F), CST : 40±5°C
2.2 Relative Humidity : 65±10% 
2.3 Power Voltage :  Standard input voltage 

(100~240V@ 50/60Hz)  
• Standard Voltage of each products is marked by models 

2.4 Specification and performance of each parts are followed

each drawing and specification by part number in
accordance with BOM .  

2.5 The receiver must be operated for about 20 minutes prior

to the adjustment.

3. Test method  

3.1 Performance : LGE TV test method followed.
3.2 Demanded other specification 

Safety : UL, CSA, IEC specification 

3.3 EMC : FCC, ICES, IEC specification

Содержание 42LG70 Series




































Отзывы: