– 5 –
PARTS, TOOLS, MATERIALS
THE FOLLOWING PARTS ARE SUPPLIED WITH THE OVEN:
NOTE: Depending on your ventilation requirements, you may not use all of these parts.
Damper/duct connector
(for roof venting or wall venting installation)
Not Actual Size (2 pieces must be assembled as
shown)
One power cord clamp
and
One dark-colored mounting screw
(to hold the power cord)
Actual Size
Two tapping screws
- Actual Size
(for attaching the damper duct connector)
One power cord clamp bushing
- Actual Size (for the cord hole in a metal upper cabinet)
NOTE: You need to install at least two lag screws into a 2" x 4" stud and four anchor bolts into the wall.
and the mounting area must meet the 150 lbs. weight requirement.
Four 1/4" x 2" lag screws
- Actual Size
(for wall stud holes)
Four 1/4" x 3" toggle bolts -
Actual Size
(for drywall holes)
Two 1/4" x 3" bolts -
Actual Size
(for securing to the upper cabinet)
Four spring toggle heads
- Actual Size
(for the toggle bolts)
One upper cabinet template-
Not Actual Size
One rear wall template- Not
Actual Size
(3 pieces mounting plate only)
