9
ENG
ENGLISH
Connections (Notifications)
Your monitor supports the Plug & Play* feature and has the built-in
speakers with Virtual Surround that reproduces sound clearly with
a rich bass.
* Plug & Play: The function when a PC recognizes a connected device
that users connect to a PC and turn on, without device configuration
or user intervention.
NOTE
f
For the best picture quality, connect the external device and the
monitor with the HDMI cable.
f
The monitor may flicker when turned on in an area where the
temperature is low. This is normal.
f
Sometimes red, green, or blue spots may appear on the screen.
This is normal.
f
Do not press the screen for a prolonged time. This may cause
image distortion.
f
Do not display a still image on the screen for a prolonged time.
This may cause image retention. Use a screensaver if possible.
Other connections
Some separate cable is not provided.
For the best picture and audio quality, connect the external device
and the monitor with the HDMI cable.
f
USB port supports 0.5 A electric current. If you need more electric
current in case of HDD, use the separate power adaptor.
Connecting to a PC
NOTE
f
If you want to use HDMI-PC mode, you must set the
Input Label
to
PC
mode.
f
The
OSD (On Screen Display)
is displayed on the screen as shown
below.
-
When turning the product on in
HDMI
input.
-
When switching to
HDMI
input.
Is the input connected to your PC?
Do not show message again
Yes
No
f
If you select "
Yes
" the size and image quality are optimised for
your PC.
f
If you select "
No
" the size and image quality are optimised for the
AV device (DVD player, set-top box).
f
If you select "
Do not show message again
" this message does
not appear until the monitor is reset. You can change the set value
in
SETTINGS INPUT Input Label
.
Remote control
The descriptions in this manual are based on the buttons on the
remote control.
Please read this manual carefully and use the monitor correctly. To
replace batteries, open the battery cover, replace batteries
(1.5 V AAA) matching the
and
ends to the label inside the
compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
f
Do not mix old and new batteries, as this may damage the remote
control.
f
This remote uses infrared light. When in use, it should be pointed
in the direction of the monitor’s remote sensor.
A
B
A
(Power)
Turn the power on or off.
Resizes an image.
Changes the input source.
B
Adjusts the volume level.
Mutes all sounds.
Moves to the previous or next screen.
f
f
The wall mount kit includes an installation manual and necessary
f
You can obtain additional
f
The length of screws may differ depending on the wall mount.
f
For more information, refer to the manual supplied with the wall
Back of the monitor
