LG 32LP2DC-UA, Руководство по обслуживанию

Страница: 12 / 47

- 12 -
1. Application Object
This instruction is for the application to the LCD TV.
2. Designation.
2.1 As this chassis is a non-charging type of chassis for
insulation of the power supply part, it may not use an
insulation type of transformer but it is better to adjust after
operating an insulation type of transformer between the
power supply line and the input side of chassis.
2.2 Adjustment must be done according to accurate order.
However, order may be changed considering mass
production.
2.3 Adjustment must be done in environment of ambient
temperature of 25 5°C, RH 65 10% unless specially
designated.
2.4 For adjustment, input voltage of the receiver must be
maintained at 110V, 60Hz.
2.5 The receiver must be maintained in preliminary operation
status for about 15 minutes before adjustment unless
specially designated.
Perform preliminary operation after receiving 100%
White Pattern (06CH).
(Or 3. White Pattern status of Ex-Adjust)
White Pattern entry method
A) Enter into Ez-Adjust by pressing the ADJ key on
the adjustment R/C.
B) 100% FULL WHITE PATTERN appears if pressing
the OK ( ) key after selecting the 3.WHITE
PATTERN with the CH + / - KEY.
* It is possible to heat run the set without a separate
signal generator in this mode.
Caution : Care must be taken as afterimage phenomena
may occur about the black level part of screen If leaving
pause image turned on for more than 20 minutes
(especially inner digital pattern (13 CH), Cross Hatch
Pattern (09CH) with significant black/white contrast).
3. Total Adjustment
3.1 EDID (Extended Display Identification Data ) / DDC
(Display Data Channel) download
3.1.1 Summary
: This function was created by VESA and is intended to
realize "Plug and Play" that the computer automatically
communicates with the monitor through mutual change of
information and re-configure user environment so than the
user can immediately use the computer without providing
direct command to the PC or monitor.
3.2 AD9883A-Set Adjustment
3.2.1 Summary
: The AD9883A-Set Adjust is function that the A/D
converter automatically sets up optimum blacklevel and
gain and compensate RGB deviation.
- DVI EDID Data
- RGB EDID Data
ADJUSTMENT INSTRUCTION
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 00 FF FF FF FF FF FF 00 1E 6D 01 01 01 01 01 01
10 03 0E 01 03 98 6E 3E 96 08 E8 AA A1 57 49 9C 25
20 10 48 4B AF CE 00 31 4A 31 4F 3B C0 45 40 61 4F
30 01 01 01 01 01 40 C3 1E 00 20 41 00 20 30 10 60
40 13 00 4C 6C 42 00 00 1E 00 00 00 FC 00 4C 47 20
50 4C 43 44 20 20 20 20 20 20 0A 00 00 00 FD 00 38
60 4B 1E 3E 08 00 0A 20 20 20 20 20 20 00 00 00 FC
70 00 33 32 4C 50 31 44 43 20 20 20 20 20 20 00 BE
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 00 FF FF FF FF FF FF 00 1E 6D 01 01 01 01 01 01
10 03 0E 01 03 18 6E 3E 96 08 E8 AA A1 57 49 9C 25
20 10 48 4B AF CE 00 31 4A 31 4F 3B C0 45 40 61 4F
30 01 01 01 01 01 40 C3 1E 00 20 41 00 20 30 10 60
40 13 00 4C 6C 42 00 00 1E 00 00 00 FC 00 4C 47 20
50 4B 43 44 20 20 20 20 20 20 0A 00 00 00 FD 00 38
60 4B 1E 3E 08 00 0A 20 20 20 20 20 20 00 00 00 FC
70 00 33 32 4C 50 31 44 43 20 20 20 20 20 20 00 3E