background image

LGE Internal Use Only

Copyright ©2009 LG Electronics. Inc. All right reserved. 
Only for training and service purposes

- 14 -

3. Component1/2, AV1/2, S-Video doesn’t display

Check JK1402, JK1404, JK1405

Can you see the normal waveform?

NO

JK1402, JK1404, JK1405 may have problem.

Replace this Jack.

Check the output  of Main IC(IC100).

Especially you should check

The H,V sync and clock.

Can you see the normal waveform?

YES

NO

After checking the Power of Main IC(IC100) you

should decide to replace Main IC or not.

This board has big problem because Main

IC(IC100) have some troubles.

After checking thoroughly all path once again,

You should decide to replace Main Board or not.

YES

4. RGB PC doesn’t display

Check JK1407 ,

Can you see the normal waveform?

NO

JK1407

may have problem. Replace this Jack.

Check the output  of Main IC(IC100).

Especially you should check

The H,V sync and clock.

Can you see the normal waveform?

YES

NO

After checking the Power of Main IC(IC100) you

should decide to replace Main IC or not.

This board has big problem because Main

IC(IC100) have some troubles.

After checking thoroughly all path once again,

You should decide to replace Main Board or not.

YES

Содержание 32LH20FD





























Отзывы: