ENGLISH
8
•
Remove the stand before installing the TV on a wall mount
by performing the stand attachment in reverse.
•
For more information of screws and wall mount bracket,
refer to the Separate Purchase.
•
If you intend to mount the product to a wall, attach VESA
standard mounting interface (optional parts) to the back
of the product. When you install the set to use the wall
mounting bracket (optional parts), fix it carefully so as
not to drop.
•
When mounting a TV on the wall, make sure not to install
the TV by hanging the power and signal cables on the back
of the TV.
•
Do not install this product on a wall if it could be exposed
to oil or oil mist. This may damage the product and cause
it to fall.
•
Screw length from outer surface of back cover should be
under 8 mm. (For 28LK43*)
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Wall mount Pad
Back Cover
Max. 8 mm
Connections
You can connect various external devices to the TV. For more
information on external device’s connection, refer to the manual
provided with each device.
Antenna/Cable
Connect an antenna, cable, or cable box to watch TV while referring to
the following. The illustrations may differ from the actual items and an
RF cable is optional.
•
Make sure not to bend the copper wire of the RF cable.
Copper wire
•
Complete all connections between devices, and then connect the
power cord to the power outlet to prevent damage to your TV.
•
To improve the picture quality in a poor signal area, purchase a
signal amplifier.
•
Use a signal splitter to use 2 TVs or more.
•
If the antenna is not installed properly, contact your dealer for
assistance.
