6. CI+ Key Download method
(1) Download Procedure
1) Press “Power on” key of a service remote control.
(Baud rate : 115200 bps)
2) Connect RS232-C Signal Cable.
3) Write CI+ Key through RS-232-C.
4) Check whether the key was downloaded or not at ‘In
Start’ menu. (Refer to below.)
=> Check the Download to CI+ Key value in LGset.
1. Check the method of CI+ Key value.
a. Check the method on Instart menu.
b. Check the method of RS232C Command.
1) Into the main ass’y mode (RS232 : aa 00 00)
2) Check the key download for transmitted command.
(RS232 : ci 00 10)
3) Result value
- Normally status for download : OKx
- Abnormally status for download : NGx
2. Check the method of CI+ Key value. (RS232)
1) Into the main assembly mode (RS232 : aa 00 00)
2) Check the method of CI+ key by command.
(RS232 : ci 00 20)
3) Result value
i 01 OK 1d1852d21c1ed5dcx
- 15 -
LGE Internal Use Only
Copyright ©2011 LG Electronics. Inc. All rights reserved.
Only for training and service purposes
CMD 1
CMD 2
Data 0
A
A
0
0
CMD 1
CMD 2
Data 0
C
I
1
0
CMD 1
CMD 2
Data 0
A
A
0
0
CMD 1
CMD 2
Data 0
C
I
2
0
CI+ key Value
Содержание 22LD320H-TB
Страница 37: ......
