LG 20HIZ20, Руководство пользователя

Страница: 34 / 59

34
External Control Device Setup ; RS-232C
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None • Use a crossed (reverse) cable.
• Stop bit : 1 bit
• Communication code : ASCII code
Communication Parameters
Transmission
* [Command 1] : First command to control the set.(j,k,mor x)
* [Command 2] : Second command to control the set.
* [Set ID] : You can adjust the seIDtochoosedesired TV ID
number in Setup menu. Adjustment range is 1~
99. When selecting Set ID ‘0’, every connected
the TV is controlled. Set ID is indicated as decimal
(1~ 99) on menu and as Hexa decimal (0x0~
0x63) on transmission/receiving protocol.
* [DATA] : To transmit command data.
Transmit ‘FF’ data to read status of comand.
* [Cr] : Carriage Return
ASCII code ‘0x0D’
* [ ] : ASCII code ‘space (0x20)’
[Command1][Command2][ ][Set ID][ ][Data][Cr]
Transmission / Receiving Protocol
OK Acknowledgement
* The set transmits ACK (acknowledgement) based on this
format when receiving normal data. At this time, if the data
is data read mode, it indicates present status data. If the
data is data write mode, it returns the data of the PC com-
puter.
[Command2][ ][Set ID][ ][OK][Data][x]
Error Acknowledgement
* The set transmits ACK (acknowledgement) based on this
format when receiving abnormal data from non-viable
functions or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
[Command2][ ][Set ID][ ][NG][Data][x]
01. Power k a 0 ~ 1
02. Aspect Ratio k c *
03. Screen Mute k d 0 ~ 1
04. Volume Mute k e 0 ~ 1
05. Volume Control k f 0 ~ 64
06. Contrast k g 0 ~ 64
07. Brightness k h 0 ~ 64
08. Colour k i 0 ~ 64
09. Tint k j 0 ~ 64
10. Sharpness k k 0 ~ 64
11. OSD Select k l 0 ~ 1
12. Remote Control k m 0 ~ 1
lock mode
13. PIP/DW k n *
14. PIP Position k q 0 ~ 3
15. Balance k t 0 ~ 64
16. Colour Temperature k u 0 ~ 3
17. Red Adjustment k v 0 ~ 3C (or 50)
18. Green Adjustment
k w 0 ~ 3C (or 50)
19. Blue Adjustment k $ 0 ~ 3C (or 50)
20. Abnormal Status k z FF
21. ISM Method j p 0 ~ 3
22. Low Power j q 0 ~ 1
23. Orbiter Time Setting j r 1 ~ FE
24. Orbiter Pixel Setting j s 1 ~ 3
25. Auto Configure j u 1
26. Tune Command m a *
27. Key m c Key Code
28. Input select (Main) x b
*
29. Input select (PIP)x y
*
COMMAND
1
COMMAND
2
DATA
(Hexa)
Command Reference List
Set ID
- Use this function to specify a monitor ID number.
- Refer to ‘Real Data Mapping 1’. See page 38.
-
Set ID Setup
is located in service menu. (ADJ => MENU => Set ID Setup)
Installation Menu V2.0
MCU Version 2.02
Set ID Setup
LG Hotel Mode Setup
G G
TV Link-Loader
G G
Password Change
G G
Set ID Setup
G G
Clock Setup
G G
Configuration Setup
G G
Set ID Lock NO
Set ID 1
DE F G
OK MENU
MENU
DE G
OK