background image

14

ENGLISH

Power-related Precautions

 WARNING

• 

If water or other matter enters the product (power cord), it is recommended that you immediately 
unplug the power cord and contact the manufacturer.

• 

Make sure that you connect the power cord to a grounded outlet.

• 

You must not use the power plug with wet hands. If there is any water or dust on the cord pins, make 
sure that you dry them thoroughly or wipe them off before use.

• 

Make sure that you securely plug in the power plug. If the socket-outlet is loose, it must not be used.

• 

When the power cord is plugged into an outlet, be careful not to insert chopsticks or other conductors 
into the other outlet. Also, it is not recommended to touch the power plug immediately after 
unplugging from the outlet.

• 

For the power cord, make sure that you use genuine or approved standard products supplied by us.

• 

Make sure that you use it at the rated voltage.

• 

Make sure that you unplug the power cord from the outlet when not using it for a long time.

• 

When removing the power cord, make sure that you hold the plug and do not bend the power cord 
excessively.

• 

Make sure that you do not place heavy objects (such as electronic products, clothing, etc.) on the power 
cord and do not step on it or get sharp objects.

• 

You must not disassemble, repair or modify the power cord.

• 

The power cord is the main power disconnect, so make sure that you place it somewhere easily 
accessible.

• 

If the product is connected to AC wall power, AC power will not be completely blocked even when the 
switch is off.

 CAUTION

• 

Make sure that you do not disconnect the power cord when using the product.

• 

When the power plug pin or the outlet becomes dusty, make sure that you clean it thoroughly.

• 

Make sure that you do not turn the monitor on and off by plugging and unplugging the power plug 
into the outlet. (The power plug should not be used as a switch.)

• 

Make sure that you keep the power cord away from any heating devices.

Precautions When Transporting the Product

 WARNING

• 

Before moving the product, disconnect the power cord and all other connected cables. 

• 

When carrying the product, make sure the screen faces forward and hold it firmly in both hands.

 CAUTION

• 

Do not discard the delivery box with the original packaging. Put the product in the box when carrying.

• 

When moving or unpacking the product, make sure that two or more people safely lift it because 
it is heavy. Using the product after it has fallen may result in electric shock or fire. Contact the 
manufacturer.

Содержание 19HK312C
































































Отзывы: