LG 17HK701G-WV, Руководство пользователя

Страница: 37 / 92

15
ENGLISH
Preparing
•
Connect the cables to the corresponding connectors. Otherwise, the detector may malfunction or be
damaged.
•
The power supply provided by LG is designed for the LG detector. If you need to use a different type of the
power supply, please contact us for further information.
Handling
•
Handle the detector carefully since the detector may be damaged when it is hit, falls, or receives a strong
impact.
•
Use the detector on a flat surface to prevent it from being bent. If you put the detector on an uneven surface,
the detector may be damaged.
•
Check the detector daily to make sure it is working properly. Condensation may occur in the detector
when a low room temperature goes up rapidly. In this case, wait until the condensation disappears before
performing the exposing operation. If you use the detector when there is still condensation, the device
may not function properly. If you want to use an air conditioner, the room temperature should be raised
or lowered slowly so that there is no temperature difference between the room and detector to prevent
condensation. Maintain the recommended room temperature.
•
Do not use the detector near equipment that emits a strong magnetic field. Otherwise, image noise or
artifacts may occur.
•
Make sure the connector does not come in contact with patients.
•
The connector used for connection with external devices must conform to the IEC standard.
•
Do not apply excessive force to the detector. Doing so may damage the device.