ENGLISH
17
Registering magic remote
How to register the magic remote
To use the Magic Remote, first pair it with your TV.
1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the
Wheel (OK)
on
the remote control.
* If the TV fails to register the Magic Remote, try again after turning the
TV off and back on.
How to deregister the magic remote
Press the
(BACK)
and
(HOME)
buttons at the same time, for
five seconds, to unpair the Magic Remote with your TV.
* Pressing and holding the
button will let you cancel and re-reg-
ister Magic Remote at once.
How to use magic remote
•
Shake the Magic Remote slightly to the right and left or press
(HOME)
,
(INPUT)
,
buttons to make the pointer
appear on the screen.
(In some TV models, the pointer will appear when you turn the
Wheel (OK)
button.)
•
If the pointer has not been used for a certain period of time or
Magic Remote is placed on a flat surface, then the pointer will
disappear.
•
If the pointer is not responding smoothly, you can reset the
pointer by moving it to the edge of the screen.
•
The Magic Remote depletes batteries faster than a normal remote
due to the additional features.
Precautions to take when using the
magic remote
•
Use the remote control within the specified range (within 10 m).
You may experience communication failures when using the device
outside the coverage area or if there are obstacles within the
coverage area.
•
You may experience communication failures depending on the
accessories.
Devices such as a microwave oven and wireless LAN operate in the
same frequency band (2.4 GHz) as the Magic Remote. This may
cause communication failures.
•
The Magic Remote may not work properly if a wireless router (AP) is
within 1 meter of the TV.
Your wireless router should be more than 1 m away from the TV.
•
Do not disassemble or heat the battery.
•
Do not drop the battery. Avoid extreme shocks to the battery.
•
Inserting the battery in the wrong way may result in explosion.
Licenses
Supported licenses may differ by model. For more information about
licenses, visit
www.lg.com
.
Open source software notice
information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit
http://opensource.
lge.com
.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost
of media, shipping, and handling) upon email request to opensource@
lge.com. This offer is valid for three (3) years from the date on which you
purchased the product.
