4.8 Change ultrasonic program
On the main display, the 4 transmitters are indicated with T1, T2, T3 and T4.
Ÿ
Select the Transmitter you want to change by pressing the “Select” button
Ÿ
Press the “Enter” button.
Ÿ
By pressing the “Select” button, you can choose from the different frequency
programs P01 to P12 and OFF.
Ÿ
Press the “Enter” button to activate a program.
Ÿ
The e-Box will confirm with 1 beep.
Ÿ
A confirmation SMS will be send to the selected phone number
(For explanation of the code in the SMS find section 4.7.4)
The transmitters of the LG Sonic e-Line can be set to a
specific, preprogrammed ultrasonic program.
Depending on the model of the e-Box, the LG Sonic e-
Line can support 1, 2, 3, or 4 transmitters that can be
programmed independently.
The ultrasonic program can be changed by:
Ÿ
Control buttons on the e-Box (4.8.1)
Ÿ
Sending an SMS message (4.8.2)
4.8.1 Change program by control buttons on the e-Box
Send an SMS to the number of the SIM card inserted in your
device with the code:
[PINCODE]
t
[TRANSMITTER NR]
p
[PROGRAM NR]
(the standard pincode is 0000 to change the pincode see section 4.7.3)
For example send code
To set Transmitter number 1 to program number 4:
0000t1p4
To set Transmitter number 3 to program number 5:
0000t3p5
(
The e-Box will beep once, if the SMS is received.)
- On the main screen of the e-Box,
the SMS message that was sent to the device will appear.
- The program number on the main screen will change.
- The e-Box will send a confirmation message to your phone
number.
(for explanation of the code, please see section 4.7.4)
!
The
LG Sonic
e-Line
products are all being send
with a specific program, as
advised by LG Sound.
For an optimal result of the
LG Sonic e-Line it is advised
to change the ultrasonic
program
ONLY
after the
recommendation of an
LG Sonic representative.
4.8.2 Change program by sending an SMS message
LG SONIC
