12
EN
Levelling
The appliance has two front levelling legs. Adjust
the legs to alter the tilt from front-to back or side-to
side. If the appliance seems unsteady, or the door
does not close easily, adjust the appliance’s tilt
using the instructions below:
1
Open the bottom drawer and remove the
cover from the appliance.
2
Turn the levelling leg to the left to raise that
side of the appliance or to the right to lower it.
It may take several turns of the levelling leg to
adjust the tilt of the appliance.
3
Open the door and the drawers and check to
make sure that they close easily. If they do
not close easily, tilt the appliance slightly more
to the rear by turning both levelling legs to
the left. It may take several more turns, and
be sure to turn both levelling legs the same
amount.
4
When the appliance is level, open the bottom
drawer and reassemble the cover.
Turning on the Power
Connecting the Appliance
After installing the appliance, connect the power
plug into the outlet socket.
NOTE
•
After connecting the power supply cord (or
plug) to the outlet, wait 3 or 4 hours before you
put food into the appliance. If you add food
before the appliance has cooled completely,
your food may spoil.
Moving the Appliance For
Relocation
Preparing for Relocation
1
Remove all food from inside the appliance.
2
Pull the power plug out, insert and fix it into
the power plug hook at the rear or on top of
the appliance.
3
Tape parts such as shelves and the door
handle to prevent from falling off while moving
the appliance.
4
Move the appliance with more than two people
carefully. When transporting the appliance
over a long distance, keep the appliance
upright.
5
After installing the appliance, connect the
power plug into a mains outlet socket and
switch it on.